Skip to content
WaterHeaterCalc

Heat pump and hybrid water heaters

Rinnai REHP80 80 Gallon Specifications

Researched from the DOE test procedures, NFPA 54 and NEC code tables, and manufacturer specifications. Updated .

Quick answer

The Rinnai REHP80 80 Gallon is a heat pump and hybrid water heaters with a 80 gallon tank. Its listing publishes no input rating, so no performance figure is computed on this page.

This page collects what is actually published about the Rinnai REHP80 80 Gallon and shows what those figures produce, computed rather than transcribed. Anything the listing does not publish is not filled in with an estimate.

Published specifications

Everything here is taken from the listing or the manufacturer, and nothing is inferred.

Rinnai REHP80 80 Gallon published figures
SpecificationValue
Gallons80
FuelElectric heat pump
Energy StarYes

Published standard Source: Manufacturer listing data. A specification not listed here is one this listing does not publish. Check the installation manual for the full data plate.

Why there is no performance table on this page

This listing does not publish an input rating in BTU per hour or in kilowatts, and without one there is nothing to compute a flow rate or a recovery rate from. Estimating it from the price or from the physical size would produce a confident number with nothing behind it, so this page does not.

The installation manual for this model publishes the input rating on its data plate. Once you have that figure, the recovery rate calculator and the tankless sizing calculator will do the rest.

How it sits against the rest of its category

Other heat pump and hybrid water heaters in this catalog: Senville Hybrid Heat Pump 50 Gallon, Rinnai REHP50 50 Gallon, ACiQ 50 Gallon Hybrid, Rinnai REHP65 65 Gallon.

Compare them on input rating and on the figures the manufacturer actually publishes rather than on the headline number in the listing title, which in this category is frequently a maximum measured under conditions the listing never states.

Other heat pump and hybrid water heaters

Beginner
Senville Hybrid Heat Pump 50 Gallon
Senville

Senville Hybrid Heat Pump 50 Gallon

$1,099.99

The lowest price of entry into a heat pump water heater in this catalog, and Energy Star listed, which means its efficiency figure was measured against the DOE test procedure rather than claimed.

Best for: A first heat pump water heater in a warm garage or basement

Check price on Amazon
Intermediate
Rinnai REHP50 50 Gallon
Rinnai

Rinnai REHP50 50 Gallon

$1,799.00

A 50 gallon heat pump tank from a manufacturer with an established residential service channel, which is the part that decides what year eight looks like.

Best for: The standard 50 gallon replacement, done properly

Check price on Amazon
Intermediate
ACiQ 50 Gallon Hybrid
ACiQ

ACiQ 50 Gallon Hybrid

$1,799.99

A hybrid runs its compressor most of the time and falls back to resistance elements on a heavy draw, which is why a hybrid never simply fails to make hot water.

Best for: Households unwilling to risk a slow recovery

Check price on Amazon

Frequently asked questions

What are the specifications of the Rinnai REHP80 80 Gallon?
The listing publishes gallons, fuel, energy star and related figures, shown in full in the table on this page. Anything not shown is something the listing does not publish, and this page does not estimate it.
Is this page based on hands-on testing?
No, and we never claim otherwise. Everything here is compiled from the manufacturer listing, published specifications and the energy relations that turn those specifications into flow and recovery figures. We do not test products in person. Where a figure is not published, this page says so rather than estimating it.
Are the prices on this page current?
They come from verified catalog data at the time the page was built, and prices in this category move often. Treat any price shown as a guide and check the listing itself before deciding. Availability moves even faster than price does on water heater accessories in particular.

A water heater is a pressure vessel. The temperature and pressure relief valve is the one component on it that is never capped, plugged or removed, and a valve that will not open when you lift the test lever has failed and needs replacing rather than ignoring. If the valve weeps after the heater runs, that is thermal expansion in a closed system and the answer is an expansion tank or a pressure reducing valve, never a cap.